Our Offices

Our Office

Seaward Powertest 200


$799.00

(Excl. GST)

Overview

The Seaward Powertest 200 is a multifunction installation tester from electricians offering superb value and featuring 6 testing functions in one package. The Instrument offers low cost of ownership and offers functions often found in instrument costing twice as much.

Click here for a datasheet

Features

  • Voltage Meaasurement up to 440V AC
  • Insulation testing at 250V, 500V, and 1000V
  • RCD testing - trip time, and trip current with Auto testing x1/2, x1, x2 and x5
  • RCD AC and DC type testing
  • Loop Impedance testing with PSC and PFC display
  • No-trip Loop Impedance testing
  • Phase Rotation testing
  • Integrated socket testing
  • Easy to handle and compact size
  • Large backlit LCD Display
  • CAT III 300V rating
  • Supplied with standard AU single phase plug and 3-phase/switchboard lead set with probes/crocodile clips

    Specification

    Voltage

  • Range 0V to 440V
  • Accuracy +/- 5% +/- 2digits from 0 to 100Hz
  • Resolution 1V
  • Continuity

  • Range 0.01Ohms to 200Ohms
  • Accuracy +/-2% +/-5 digits
  • Resolution 0.01Ohms to 1.99Ohms
  • 2.0Ohms to 19.9Ohms
  • 20Ohms to 200Ohms
  • Test Voltage >4Vdc >25Vdc Open Circuit
  • Test Current >200mA
  • Compliance IEC61557-4
  • IEC61557-10
  • Insulation

  • Test Voltage 250V/ 500V/ 1000V
  • Range 0.05MOhms to 200MOhms
  • Accuracy +/-5 % +/-5 digits
  • Resolution 0.01MOhms to 19.9MOhms
  • 2.0MOhms to 19.9MOhms
  • 20MOhms to 200MOhms
  • Test Current 1mA
  • Compliance IEC1557-2 IEC1557-10
  • RCD Trip Time Test

  • Range 0ms to 2000ms
  • Accuracy +/-5% +/-2 digits
  • RCD Trip Time Test (Continued)
  • Range 0 to 2000ms 1/2 1x
  • 0 to 300ms 1x general (500ms selective)
  • 0 to 40ms 5x
  • Test Current 10mA/ 30mA/ 100mA (1/2, 1x, 2x, 5x current)
  • 300mA/ 500mA (1/2, 1x current)
  • Compliance IEC1557-6
  • IEC1557-10
  • RCD Trip Current / Ramp Test

  • Test current -5% to 5%
  • Step Duration 300ms
  • Compliance IEC61557-6 61557-10
  • Non-Trip Loop Impedance

  • Range 0.01Ohms to 2000Ohms
  • Typical Accuracy +/- 5% +/-12 digits (to 1.99Ohms) +/-5 digits (to 2000Ohms)
  • Resolution 0.01Ohms to 1.99Ohms
  • 2.0Ohms to 19.9Ohms
  • 20Ohms to 2000Ohms
  • Test Current <15mA RMS
  • High Current Line Impedance

  • Range 0.01Ohms to 2000Ohms
  • Typical Accuracy +/-5% +/-5 digits
  • Resolution 0.01Ohms to 1.99Ohms
  • 2.0Ohms to 19.9Ohms
  • 20Ohms to 2000Ohms
  • Test Voltate Phase to Neutral 190V to 260Ohms
  • Phase to Phase 328V to 440V
  • Test Current 3.5A Peak
  • Loop Test PFC Measurement

  • Range 1A to 26kA
  • Accuracy +/-5% +/-5 digits
  • Range 1A to 999A 1kA to 26kA
  • Line Test PSC Measurement

  • Range 1A to 26kA
  • Accuracy +/- 5% +/- 5 digits
  • Range 1A to 999A
  • 1kA to 26kA
  • General Specification:

  • Category of Tester
  • 300V Category III
  • Battery Requirements
  • 6x MN1500 (LR6) (AA) 1.5v
  • Instrument Weight and Dimensions

  • Weight (approx.) 836g
  • Dimensions (approx.) 260 x 55 x 105mm
  • Standard Accessories The PowerTest 200 is supplied with the following accessories as standard:

  • Padded neck strap
  • Professional carry case
  • Mains lead
  • 1.2M black test lead
  • 1.2M red test lead
  • 1.2M green test lead
  • Black crocodile clip
  • Red crocodile clip
  • Green crocodile clip
  • Remote probe with test buttons
  • 6 x MN1500 (LR6) (AA) 1.5v batteries
  • Spare 1.6A 1000v HRC FF fuse
  • User manual
    • Model: SEAPT200
    • Manufactured by: Seaward

    Be the first to write a review.  Write a Review.

    This product was added to our catalog on Tuesday 23 June, 2020.

    Customers who bought this product also purchased...




    Accepted Payment

    Accepted payment methods

    Starter Packs

    Have you seen
    Your IP Address is: 3.236.118.7
    Copyright © 2021 Test and Tag Supplies Online. | All Right Reserved..
    //