Our Offices

Our Office

TTS3PHAT- ATS 3 Phase Leakage Adaptor (5 pin 20A & 32A)


$880.00

(Excl. GST)

Overview: A 5 pin, 20 Amp and 32Amp, 3 Phase Leakage Adaptor with in-built LCD display.

Application:

  • Performs leakage current measurement and displays the result on the in-built LCD display (displayed in mA)
  • Performs an earth bond test in conjunction with your appliance tester
  • Record the mA readings on your logging appliance tester

     

    Features:
    Most three phase equipment incorporates electronic circuitry such as temperature controls, PLCs which control relays, or motors which require starter circuits such as contactors.
    All of these types of controls, contactors and relays must be powered on to latch. Performing an insulation resistance test on such devices will only test up to the on/off switch and not show any faults inside the actual appliance.
    The TTS3PHAD5 series three phase adaptors replace insulation testing adaptors by powering-up the three phase appliance and measuring the leakage current. The TPL Series also eliminate the need for less practical methods such as dismantling appliance plugs and using a clamp meter or using three phase cable adapters with an exposed earth.
    The TTS Series provide a safe way of testing three phase appliances, at all speeds and settings, whilst taking a quick and easy measurement on the LCD display.

    Specifications:

  • TTS3PHAT: 20A/32A, 500V, 50Hz
  • Reading Rate Time: 2 - 3 readings per second
  • Range: 0 - 19.99mA AC
  • Accuracy +/- <3% +/-3d @Full Scale 5ma
  • Three Phase Socket Outlets & Plug
  • Model: TTS3PHAT

Be the first to write a review.  Write a Review.

This product was added to our catalog on Tuesday 19 May, 2009.



Accepted Payment

Accepted payment methods

Starter Packs

Have you seen
Your IP Address is: 54.92.193.89
Copyright © 2018 Test and Tag Supplies Online. | All Right Reserved..
//